I-Dos Setting; Operating The Appliance; Preparing The Appliance; Select Programme/Switch On The Appliance - Siemens WN54A2A0HK Instruction Manual And Installation Instructions

Operating the appliance

en
( varioSpeed
Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch ( varioSpeed to activate or
deactivate this additional programme
setting.
With the ( varioSpeed
Note:
additional programme setting activated,
the maximum load of washing will be
reduced, and extra water will be needed
for the washing process.
« i-Dos setting
Your appliance has an intelligent dosing
system for liquid detergent (Ý) and
fabric softener (©).
The optimum quantities of liquid
detergent and fabric softener are
dispensed automatically.
You can press « i-Dos to activate or
deactivate automatic dosing and set the
basic dosages.
~ "Intelligent dosing system"
on page 37
1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Care k programme.
~ "Before washing for the first time"
on page 19
Notes
Never switch on a damaged
■
appliance!
Inform customer service!
■
34
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a programme.
Use the programme selector to select
the required programme. The
programme selector can be rotated in
either direction.
The appliance is switched on.
The programme default settings for the
selected programme alternately appear
in the display panel:
The maximum load and
■
the duration of the programme and
■
...
■