Additional Programme Settings33; Ô Wash + Dry; Rinse Plus; Prewash - Siemens WN54A2A0HK Instruction Manual And Installation Instructions

\
Additional programme
settings
You can find possible additional
N ote:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
Ô Wash + Dry
Touch Ô Wash + Dry to activate or
deactivate the drying function. The
washing and drying without interruption
mode, individual drying mode and
individual washing mode can be
selected with this function.
Washing and drying without
■
interruption mode(only for Optional
drying programmes): select a
washing programme and touch Ô
Wash + Dry (The symbol Ô ˜ x
appeared in display). Then touch I
Start/Reload , the programme runs
and the drying time is automatically
set according to selected
programme and the amount of
laundry.
The individual drying mode: select a
■
washing programme and touch Ô
Wash + Dry till only the symbol Ô
appeared in display. The laundry will
be drying without washing.
Additional programme settings
The individual washing mode: when
■
select a programme (e.g.% Wash &
Dry 60') that defaulted washing and
drying phases combined, touch Ô
Wash + Dry till only the symbol x
appeared in display. The drying
phase will be cancelled.
Notes
Do not exceed the maximum loads
■
for drying.
Overview of programmes
~ Page 27
Maximum spin speed for
■
programme with drying phase will be
selected automatically to obtain a
good drying result.
l Rinse Plus
Settings that can be selected:
+1
+ 1 rinse cycle
+2
+ 2 rinse cycles
+3
+ 3 rinse cycles
Additional rinse cycles for particularly
sensitive skin and/or for areas with very
soft water.
Longer programme duration, due to
additional rinse cycle.
The number of rinse cycles that the
programme actually runs depends on
the number that is set as a basic setting
for the programme.
s Prewash
For heavily soiled laundry.
Notes
If intelligent dosage is selected, the
■
detergent will be dispensed
automatically for the prewash and
the main wash.
If dosing manually, allocate
■
detergent to the prewash and the
main wash. Place detergent for the
prewash in the drum and add
washing powder for the main wash
to the manual dosing compartment.
en
33