Primary And Secondary Phone Numbers; Initializing String; Dial String; Maximum Redial Attempts - ADTRAN 1200287L1 User Manual

Primary and Secondary Phone Numbers

When the MX2800 STS-1 dials out to send a trap, it first dials the
P
S
continue until a call is established and the trap is reported (or until
each number's maximum for redial attempts is reached; see
Maximum Redial Attempts below).

Initializing String

The AT command entered in this field is used to initialize the
modem. Normally, this field should be left at the default setting
(ATZ).

Dial String

The AT command entered in this field causes the modem to dial
out. Normally, this field should be left at the default setting
(ATDT).

Maximum Redial Attempts

The MX2800 STS-1 attempts to establish a call the number of times
entered in this field. If a successful call is not established after the
final attempt, the MX2800 STS-1 discards the trap messages.
61200659L1-1
P N
RIMARY HONE UMBER
P N
ECONDARY HONE
MX2800 STS-1 User Manual

Figure 3-10. Dialup Options Menu

. If the call is unsuccessful, it tries the
. Attempts between the two numbers
UMBER
Chapter 3. Configuration
3-15