Table of Contents
Advertisement
Chapter 6. Diagnostics
STS-1 LOOPBACKS
After you select
appears. The sections following the figure provide descriptions and
illustrations of the testing options. Select
test in progress.
Line Network
L
INE
This loopback occurs just prior to the HDB3/B8ZS decoder of the
LIU; therefore, any coding violations received by the STS-1 will be
inserted back into the network without modification. See Figure
6-11 on page 6-9 for an illustration of this text.
If a
operating in the
STS-1 is effectively removed from the circuit. Therefore, it is up to
the test equipment or network to provide STS-1 timing into the
circuit for the duration of the test.
6-8
STS-1 L
performs a loop of the STS-1 back to the network.
N
ETWORK
loopback is active when the MX2800 STS-1 is
L
N
INE
ETWORK
F
-R
REE
MX2800 STS-1 User Manual
, the menu in Figure 6-10
OOPBACK
1=D
Figure 6-10. STS-1 Diagnostics Menu
timing mode, the timing source for the
UN
to end a
M
ATA
ODE
61200659L1-1
Advertisement
Table of Contents
