Table of Contents
Advertisement
Chapter 3. Configuration
Alarm
SLM-P
UEQ-P
XCV
TLOS
JTRACE
3-20
Description
(Path Signal Level Mismatch)
A received signal label is mismatched if it does
not equal the locally provisioned value or the
value "equipped non-specific".
(Path Unequipped)
The path is unequipped if it is not provisioned.
Byte C2 of the STS path overhead is set to zero.
(Excessive Code Violations)
The controller is receiving excessive code
violations exceeding the threshold set by the
user (see XCV Threshold on page 3-12).
(Transmit Loss of Signal)
The transmitter has failed.
(STS Receive Path Trace)
Received in the J1 path overhead byte. This
byte is used to repetitively transmit a 64 byte
(last two bytes are a fixed CR/LF) string so the
receiving terminal in a path can verify its
continued connection to the intended
transmitter.
MX2800 STS-1 User Manual
61200659L1-1
Advertisement
Table of Contents
