Specification - Datavideo DAC-200 Installation Manual

Specifications:
INPUTS
S­VHS sources
Composite
*DV (iLink) Source
OUTPUTS
S­VHS Source
Composite Video Source 1.0 Vp­p 75ohm RCA connector
Frequency Response
DG, DP
Audio Sampling Rate
Audio Freq. Response
Audio THD
*DV (iLink) Source
GENERAL
Power (Included)
Ambient Temperature
Ambient Humidity
Dimensions
Accessories (included)
*. All the trademarks are the properties of their respective owners
Y/C in: 4—pin 75 ohm DIN connector
1.0Vp­p 75ohm RCA connector
Data Transfer Rate 25Mbps, PAL 4:2:0 / NTSC 4:1:1
Y/C out 4­pin 75ohm DIN connector
4.5 MHz +/­ 3 dB
+/­ 3%, 3°
12bit 32KHz and 16bit 48KHz option
20Hz ~ 18KHz <3dB
<0.2%
Data Transfer Rate 25Mbps, PAL 4:2:0 / NTSC 4:1:1
DC 5V / 6.0W AC Adapter
Caution: DAC­200 requires DC 5 Volt +/­ 4%, Use only
Datavideo approved Power Adaptor.
32° ­ 131°F (0° ­ 55°C)
Less than 90 %
6.15"(W) × 6.0"(D) × 1.6"(H)
156(W) × 150(D) × 40(H) m/m
1.8m IEEE 1394 cable (6 Pin to 6 Pin)
3 Phono to 3 Phono (RCA) cable.
S­Video (Y/C) cable
User's manual
Quick Start Guide
Power supply
14
20Hz~ 18KHz <3dB
(DV input)