Fcc & Ce Certification (Radio & Television Interference) - Datavideo DAC-200 Installation Manual

RADIO & TELEVISION INTERFERENCE
UNITED STATES. The equipment described in this guide generates and uses
radio frequency energy. If it is not installed and used in accordance with the
instructions in this guide, it may cause interference with radio and television
reception.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit difference from that to which
l
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
l
If necessary, you should consult your dealer or experienced radio/television
technician for additional suggestions. You may find helpful the following booklet,
prepared by the Federal Communications Commission: How to Identify and
Resolve Radio­TV Interference Problems. This booklet is available from the United
States Government printing office, Washington, D.C. 20402. The booklet number is
004­000­00345­4.
5