Specification - Datavideo DAC-8P Quick Start Manual

Specification

Input Interface
Outputs Interface
Supported HDMI
Output Formats
3G SDI Signal
HD SDI Signal
Operating
Temperature
Humidity
Dimension & Weight
Power
• 1x HD/SD-SDI input
• 1x HD/SD-SDI output (Loop Thru)
• 1x HDMI (V1.2) output
• 720x480 Interlace
• 720x576 Interlace
• 1280x720 / 50Hz Progressive
• 1280x720 / 59.94Hz Progressive
• 1280x720 / 60Hz Progressive
• 1920x1080 / 50Hz Interlace
• 1920x1080 / 59.94Hz Interlace
• 1920x1080 / 60Hz Interlace
• 1920x1080 / 50Hz Progressive
• 1920x1080 / 59.94Hz Progressive
• 1920x1080 / 60Hz Progressive
SMPTE 292 standard complied with
• Output return loss : More than 4.5 dB (3GHz)
• Output level : 0.8 Vpp ± 10%
• Rise time : Less than 130 ps
• Fall time : Less than 130 ps
• Difference between rise time and fall time within 50 ps
• Alignment jitter : Less than 0.3 UI
• Timing jitter : Less than 2.0 UI
• Rise over shot : 10%
• Fall over shot : 10%
• Equalizer use 5C-FB cable support 100 meters
SMPTE 292 standard complied with
• Output return loss : More than 15 dB (5MHz to 750MHz)
More than 10 dB (750MHz to 1.5 GHz)
• Output level : 0.8 Vpp ± 10%
• Rise time : Less than 270 ps
• Fall time : Less than 270 ps
• Difference between rise time and fall time within 100 ps
• Alignment jitter : Less than 0.2 UI
• Timing jitter : Less than 1.0 UI
• Eye aperture ratio : More than 90%
• DC offset : 0 ± 0.5V
• Equalizer use 5C-FB cable support 100 meters
• 0°C to 40°C (32°F to 102°F)
• 10% to 90% (non condensing)
• 105mm (W) x 120mm (D) x 38mm (H) / 0.5Kgs
• Output DC 12V / 500mA (4W)
DAC-8P
5