Operation Procedure - Datavideo DAC-200 Installation Manual

IMPORTANT NOTICE FOR PC/MAC EDITING SYSTEMS
The following guide lines are general advice for video editing on a computer
platform. If you have purchased a computer specified for video editing it will
almost certainly be set up correctly. If you are in any doubt please consult your
computer reseller, or a computer technician.
1.Shut down all resident programs in your PC for better editing performance.
Such as the Anti­Virus program, screen saver, system power management
software... etc.
2.Enable the Disk DMA function in windows to improve system HDD
access performance
There are too many non­linear editing platforms to give in­depth advise about
individual set­ups. The DAC­200 should be seen by your PC/MAC as though it is
a DV Camera / Recorder. If there are device control settings on your editing
platform please set them to off.
Extra details of some non­linear platforms are available on line, please go to
http://www.datavideo.info/products/dac200.htm for the latest details.
We will try to test and update system information as it becomes available,
however for in­depth information about your specific NLE platform we would
recommend that you contact your supplier, or the manufacturer.
10