Rear Panel Control/Connection - Datavideo DAC-200 Installation Manual

REAR PANEL CONTROL/CONNECTION
1 2 3 4 5 6 7
Description:
1. Stereo Audio output Phono (RCA) connectors
2. Composite Video output Phono (RCA) connector
3. S­Video (Y/C) output connector
4. Mode DIP switch
(See page 11 for more details)
S1. PAL or NTSC (PAL­ON, NTSC­OFF)
l
S2. 7.5 IRE / 0 IRE (0 IRE­ON, 7.5 IRE­OFF) (NTSC Only)
l
Please note: 0 IRE is most often used in Japan. 7.5 IRE is used elsewhere.
S3 Locked / Unlocked Audio. On – Unlocked Audio / Off – Locked Audio
l
S4 & S5 for NTSC and PAL video system
l
S5 ON
S5 ON
OFF S4
S5
OFF S4 OFF
S5
S6. Reserved, should always be OFF.
l
5.
6­Pin FireWire interface for DV In/Out
6. DC Input Jack (+ 5VDC / 6Watts)
7.
Power Switch
(Reboot the DAC­200 if you change a DIP Switch)
S4 ON
MAC OS
Smart DV – (Please see description on page 11)
S4 OFF
Windows ME / XP
ON
DV Camera
(Note: Turn­on DAC­200 before booting the PC/MAC editing software.)
9
.