Dip Switch Settings - Datavideo DAC-200 Installation Manual

Dip Switch settings to work with Windows & MAC Operation system
The DAC­200 uses dip switches 4 and 5 to control the clocking frequency when it
is converting video, if the dip switches are not configured for your operating
system or type of device, a loss in video can occur. Please refer to dip switch
chart below and make sure that your DAC­200 is setup correctly.
SMART DV is a patent pending feature that allows monitoring of the video during
a DV to DV capture.
Enabling SMART DV makes the converter transparent to an NLE system, while
still transcoding the live DV stream into analogue video. This enables users to
monitor a live digital video feed from a DV camcorder or DV deck during capture,
without any conflict. It means a huge saving of time for all video editors working
with DV tape.
NTSC System (USA)
MAC OS
NTSC System (USA)
Windows XP and Windows ME
PAL System (EU)
MAC OS
PAL System (EU)
Windows XP and Windows ME
NTSC System (USA)
Smart DV on
NTSC System (USA)
Camera
PAL System (EU)
Smart DV on
PAL System (EU)
Camera
11