D-Link DES-3010FA/GA/PA CLI Reference Guide
dot1x re-authenticate
The dot1x re-authenticate Privileged EXEC mode command manually initiates a re-authentication of all 802.1X-
enabled ports or the specified 802.1X-enabled port.
Syntax
dot1x re-authenticate [ethernet interface]
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following command manually initiates a re-authentication of 802.1X-enabled Ethernet port 6.
Console# dot1x re-authenticate ethernet 6
Page 335