Terminal Data-Dump - D-Link DES-3010FA Cli Manual

D-Link DES-3010FA/GA/PA CLI Reference Guide

terminal data-dump

The terminal data-dump User or Privileged EXEC mode command enables dumping all the output of a show
command without prompting. To disable dumping, use the no form of this command.
Syntax
terminal data-dump
no terminal data-dump
Default Configuration
Dumping is disabled.
Command Mode
User or Privileged EXEC mode
User Guidelines
By default, a More prompt is displayed when the output contains more lines than can be displayed on the screen.
Pressing the Enter key displays the next line; pressing the Spacebar displays the next screen of output. The data-
dump command enables dumping all output immediately after entering the show command.
This command is relevant only for the current session.
Example
This example dumps all output immediately after entering a show command.
Console> terminal data-dump
Page 291