D-Link DES-3010FA Cli Manual page 344

D-Link DES-3010FA/GA/PA CLI Reference Guide
Max req
Supplicant timeout
Server timeout
Session Time
MAC address
Authentication Method
Termination Cause
State
Authentication success
Authentication fails
The maximum number of times that the device sends an Extensible Authentica-
tion Protocol (EAP)-request frame (assuming that no response is received) to
the client before restarting the authentication process.
Time in seconds the switch waits for a response to an EAP-request frame from
the client before resending the request.
Time in seconds the switch waits for a response from the authentication server
before resending the request.
The amount of time the user is logged in.
The supplicant MAC address.
The authentication method used to establish the session.
The reason for the session termination.
The current value of the Authenticator PAE state machine and of the Backend
state machine.
The number of times the state machine received a Success message from the
Authentication Server.
The number of times the state machine received a Failure message from the
Authentication Server.
Page 343