Section 24. User Interface; Enable - D-Link DES-3010FA Cli Manual

D-Link DES-3010FA/GA/PA CLI Reference Guide

Section 24. User Interface

enable

The enable User EXEC mode command enters the Privileged EXEC mode.
Syntax
enable [privilege-level]
Parameters
•
privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters Privileged EXEC mode:
Console> enable
enter password:
Console#
Page 283