private-vlan isolated
The private-vlan isolated Interface Configuration (VLAN) mode command configures the isolated VLAN of the
PVLAN. To return to the default configuration, use the no form of this command.
Syntax
private-vlan isolated vlan-id
no private-vlan isolated
Parameters
•
vlan-id — Specifies the ID of the isolated VLAN.
Default Configuration
No VLAN is configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
•
This command creates an isolated VLAN and associates it with the primary VLAN.
•
The command is executed in the context of the primary VLAN.
•
An isolated VLAN can only be associated with one primary VLAN.
•
A VLAN that has been configured as an isolated VLAN cannot be configured as a primary or community
VLAN.
•
The command is not supported under the command interface range vlan.
Example
This example configures VLAN 20 as the isolated VLAN of primary private VLAN 200.
Console# config
Console(config)# vlan database
Console(config-vlan)# vlan 200
Console(config-vlan)# exit
Console(config)# interface vlan 200
Console(config-if)# private-vlan primary
Console(config-if)# private-vlan isolated 20
Page 300
VLAN Commands