Xplug Control Installation
Installation to a Web Server
It is highly recommended to install the Xplug Control application to the Web Server
for Internet Explorer 5.0. It must be installed to a Public Domain with a Fixed IP
Address.
1. Installation:
Copy the "xplug.ocx" file to any Web Server table. Note the web address of the
file location so that you can use it in the next step.
2. Configuration:
From the Web Configuration menu, select "System" and under the "Loading
ActiveX From" input web server location, type:
http://www.web server location.com/.
Once the settings are completed, you should now be able to access the Internet Camera
from the web browser by selecting ActiveX mode.
Important Information
88