D-Link SECURICAM Network DCS-900W User Manual page 49

IPView Lite
How to Change the IP Address
Click Search. IPView Lite will detect and search all the available cameras that are
installed on the local area network (example below.)
Highlight the camera you wish to change and click Change IP. If you have already
chnaged the administrator user ID and password, you will be prompted to enter your
admin ID and password before IPView Lite will allow you to change the IP Address for
the DCS-900W.
Enter the new IP Address, the Subnet Mask and the Default gateway into the respective
fields and click OK. IPView Lite will apply the new IP Address to the camera.
(continued)
49