DCS-900W. Attach the Swivel Stand Locate the stand mount on the bottom panel of the DCS-900W and screw on the swivel stand to the base of the DCS-900W. Connect the Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the back panel of the DCS-900W and attach it to the network.
Running the Setup Wizard You are now ready to run the Setup Wizard, which will guide you quickly through the installation process. Insert the D-Link DCS-900W Driver CD into your CD-ROM drive. Click Install Software Click Install Wizard Click Next...
Page 4
Running the Setup Wizard (continued) Click Click Next Click Finish...
Page 5
Running the Setup Wizard To run the Setup Wizard, click on: Start->Programs->DCS-900 Series SetupWizard. Your camera’s IP Address will be displayed here if it is valid. Click Wizard to begin You must change the Admin ID and Password immediately to protect your camera against unauthorized access.
Page 6
Running the Setup Wizard Enter an IP Address and Subnet Mask for your camera. Enter your Gateway and DNS settings. These settings must correspond with your network settings for you to access the camera. If you are unsure of what these settings should be, check with your network administrator.
Page 7
Running the Setup Wizard (continued) If you need to make any changes, click Back to modify your settings. Otherwise, click Restart to save and apply your settings. Click Restart Your setup is now complete! Click Link to launch your web browser and view your images.
Page 8
Running the Setup Wizard This screen appears if the default IP Address of the camera (192.168.0.20) does not correspond with your local area network settings. You must assign an IP address for your camera that corresponds to your network’s IP addressing scheme.
The Home screen of your camera can be accessed from the Setup Wizard using the Link button. You can also use your favorite Web browser, type “http://address” in the address box where address is the IP address that you assigned to the DCS-900W from the previous section. Press Enter.
Page 12
You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.