Xplug Control Installation; Important Information - D-Link DCS-1000 Manual

D-link systems manual web camera dcs-1000, dcs-1000w

Hide thumbs Also See for DCS-1000:

Table of Contents

Xplug Control Installation

Installation to a Web Server

It is highly recommended to install the Xplug Control application to the

Web Server for IE 5.0. It must be installed to a Public Domain with a

Fixed IP address.

1. Installation:

Copy the "xplug.ocx" file to any Web Server table. Note the web address

of the file location so that you can use it in the next step.

2. Configuration:

From the Web Configuration menu select "System" and under the

"Loading ActiveX From" input web server location

(http://www.web server location.com/).

Once the settings are completed you should now be able to access the Internet

Camera from the web browser by selecting ActiveX mode.

Note:

Set your browser security level to "Low" so that your browser will allow ActiveX

control of the camera.

Table of Contents

Dcs-1000w