D-Link SECURICAM Network DCS-900W User Manual page 30

DCS-900W Configuration
Installing the DCS-900W Behind a Router
ROUTER SET-UP AND INSTALLATION
The following steps generally apply to any router that you have on your network. The
D-Link DI-614+ is used as an example to clarify the configuration process.
Note: Because a dynamic WAN IP address can change from time to time
depending on your ISP, you may want to obtain a Static IP address from your
ISP. A Static IP address is a fixed IP address that will not change over time
and will be more convenient for you to use to access your camera from a
remote location. You can use DDNS to obtain an IP address, please refer to
P.22 for more information.
Determine Your Router's WAN IP Address
(continued)
30
Your WAN IP
Address
information
will be listed
here.