D-Link SECURICAM Network DCS-900W User Manual page 28

DCS-900W Configuration
Installing the DCS-900W Behind a Router
1) Identify Your Camera on the Network
Once you are logged into the camera via a Web browser on your network PC,click
on the Advanced Tab, and select System. Enter a unique Camera Name and
Location. These settings are important if you are installing several cameras on your
network.
2) Assign a Local IP Address for Your Camera
A Local IP Address is required to configure your camera and to view your
camera within your local (home) network. You may use the default camera IP
Address of 192.168.0.20. If you wish to use a different IP Address, be sure that the
camera settings correspond to your network settings. The Default Gateway will be
the IP Address of your router's Local IP Address(i.e.192.168.0.1 if you are using a D-
Link router)
Identify Your Camera on Your Network
Assign a Local IP Address
28
(continued)
Enter a
Unique
camera
name and
location
Enter a valid
IP address
for your
camera.