Oce cm3521 User Manual page 91

3
Re-TX User Box
If the transmission is not yet effected even after the redialing frequency set
as the [Number of Redials] in the Telephone Line Settings is finished, the job
is saved in the Re-TX User Box. Jobs in the Re-TX User Box can be redialed
manually.
0 To use the Fax Retransmit function, [Incomplete TX Hold] should have
been set to ON in the Function Setting in the Utility Mode. Refer to
p. 11-48 for the Incomplete TX Hold.
1
Press [Box] on the control panel.
2
Press [System User Box] tab.
3
Press [Re-TX User Box].
4
Select a job to be retransmitted and press [Fax TX].
5
Check the address and then press [Start].
– Address can be changed.
The job is retransmitted.
3-34
Transmission
cm3521