Sending After The Check Of Destination - Oce cm3521 User Manual

Transmission Applications
7.21

Sending after the check of destination

When you specify the destination and press the [Start] button, the Check
Destination screen and the number of cases appear. Sending after the
destination check prevents erroneous transmission due to incorrect
destination.
!
Detail
To use the Destination Check Display function, you should set the
Destination Check Display function to ON at the time of the Function
ON/OFF Setting. Refer to page 11-38 for more information on the setting
of the Destination Check Display function.
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Set [Scan Setting], [Comm. Setting] if necessary.
3
Designate the destination.
– See "Selecting One Destination" on page 3-20 for information
about designating the destination.
4
Set the original document.
– See "Placing Originals on the Platen Glass" on page 3-7 for
information about setting the document.
5
Press [Start].
Check Destination screen appears.
6
Check that a correct destination is specified and press the [TX] or
[Start] button.
cm3521
7
7-57