Oce cm3521 User Manual page 167

7
4
When you want to make the edge section clear and sharp, or when you
want to make it smooth, press
– To release the setting, press [Cancel].
5
Press [OK].
The Application screen will be restored.
6
Press [OK].
The Scan Setting screen will be restored.
7
Press [OK].
The FAX screen will be restored.
8
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-11 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the FAX Application screen.
9
Designate the destination.
– See "Selecting One Destination" on page 3-20 for designating the
destination.
10
Set the original document.
– See "Placing the Original on the Machine" on page 3-6 for
information about setting the document.
11
Press [Start].
The FK-502 reads the document and stores it in memory as a reserved
document before transmission starts.
7-26
Transmission Applications
or to the [+] or [-] side.
cm3521