Administrator Setting >> Fax Setting >> Job Settings List; Administrator Setting >> System Connection>> Prefix / Suffix Auto Setting; Administrator Setting >> Fax Setting >>Multi Lines Setting - Oce cm3521 User Manual

11
11.2.14Administrator Setting >> Fax Setting >> Job Settings List
!
Detail
For details, page 12-49.
11.2.15Administrator Setting >> System Connection>> Prefix /
Suffix Auto Setting
!
Detail
For details, page 11-63.
11.2.16Administrator Setting >> Fax Setting >>Multi Lines Setting
Set the items required for the additional line. (page 11-65)
These items can be set only when the Fax Multi Line is installed.
Item
Telephone Line Set-
ting
Function Setting
Multi Lines Setting
Sender Fax No.
11-12
Description
Dialing Method Set the dialing method for
the Line 2 (additional line).
Number of RX Call Set the arrival frequency
Rings for the Line 2 (additional
line). Set the pseudo ring
back tone frequency after
the arrival until receiving is
started.
Line Monitor Sound To hear the sound on the
line from the speaker at the
time of transmission with
the Line 2 (additional line),
set it to ON.
PC-FAX TX Setting Set the line for the PC-FAX
transmission.
Line 2 Setting Set the communication
method for the Line (addi-
tional line).
The Fax ID for the Line 2
(additional line) is printed
on the document received
by the other party as a
sender information.
Utility Mode
Available value
*
PB / 10pps
*
0-15 (2 times )
*
ON / OFF
*
No Selection /
Line 1 / Line 2
*
TX and RX / RX
Only / TX Only
Up to 20 charac-
ters with 0 to 9, +,
space, * and #
used.
cm3521