Transmission
3.3.2
Density
Set Density according to the lightness or darkness of the original. Density
can be set in 9 steps. [Std.] is set at the time of purchase.
Light
Std.
Dark
3.3.3
Simplex/Duplex
This is used to set the manner in which originals are scanned according to
the type of original. There are 3 types. Single sided is set at the time of
purchase.
Single sided
Double sided
Cover + 2-Sided
cm3521
Press to scan originals so that they are lighter than the density de-
tected with Standard.
Press to scan originals at a density that is between Darker and
Lighter. Used when returning to the default setting.
Press to scan originals so that they are darker than the density
detected with Standard.
Press this when scanning one-sided originals.
Press this when scanning two-sided originals.
Press this button when scanning cover and two-sided originals.
3
3-13