11
Header/Footer Position
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
3
Press [Header/Footer Position].
4
Select the item you wish to set.
–
To close the Utility Mode screen, press [Exit] in the sub-area.
11-30
Utility Mode
cm3521