Utility Mode
11.17 Set the Multi Lines Setting
Set the items for the additional line.
Note
Multi Lines Setting can be set only when the Fax Multi Line is installed.
Telephone Line Setting
Set the parameter for the additional line.
Item
Telephone Line Set-
ting
*
indicates factory default setting.
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
–
Some items may not be displayed depending on the optional
settings.
cm3521
Description
Dialing Method
Set the dialing method for
the Line 2 (additional line).
Number of RX Call
Set the arrival frequency
Rings
for the Line 2 (additional
line). Set the pseudo ring
back tone frequency after
the arrival until receiving is
started.
Line Monitor Sound
To hear the sound on the
line from the speaker at the
time of transmission with
the Line 2 (additional line),
set it to ON.
11
Available value
*
PB
/ 10pps
*
0-15 (2 times
)
*
ON / OFF
11-65