Oce cm3521 User Manual page 108

Transmission
– "Hour" and "minute" of the time to start communication are
displayed in the 24-hour style, and entered in two digits.
– For example: To set the time to start communication at 9:07 p.m.,
input "21" and "07."
– To release the setting, press [OFF].
5
Press [OK].
You return to the Comm. Setting screen.
6
Press [OK].
You return to the FAX screen.
7
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-11 for
information about setting functions in the FAX screen. See
"Opening the Scan Setting Screen and Comm. Setting screen" on
page 7-2 for information about setting functions in the FAX
Application screen.
8
Designate the destination(s).
– For details, see "Selecting One Destination" on page 3-20.
9
Set the original document.
– For details, see "Placing Originals on the Platen Glass" on
page 3-7.
10
Press [Start].
The FK-502 reads the document and holds it in memory until the
specified time when transmission starts.
!
Detail
To cancel transmission, see "Canceling Transmission" on page 3-38.
If the destination is not ready to receive, your call will be redialed. For
information about redialing, see "Recently Dialed" on page 3-29.
If transmission fails, see "Cannot Send Messages" on page 5-2.
cm3521
3
3-51