Setting Transmission Conditions - Oce cm3521 User Manual

Transmission
3.3

Setting Transmission Conditions

Original Image Type, Density, Simplex/Duplex and Resolution are displayed
when [Scan Setting] is pressed on the FAX screen. These can be used to set
transmission conditions according to the type of original to be sent.
!
Detail
The condition for transmission cannot be set in units of page.
Setting Transmission Conditions
1
Press [Scan Setting] on the FAX screen.
2
Press the key desired to be set.
– Display on the screen varies depending on the country.
cm3521
3
3-11