Table of Contents
Advertisement
4.
Press the [ ] or [ ] key to select [Wi-Fi Connection], and then press the [OK] key.
5.
Press the [ ] or [ ] key to select [802.11 Ad-Hoc Mode], and then press the [OK] key.
6.
Enter the SSID, and then press the [OK] key.
The characters that can be used are ASCII 0x20-0x7e (32 characters).
7.
Press the [ ] or [ ] key to select the channel number, and then press the [OK] key.
8.
Select the security method.
If you have selected [Open System - None], proceed to Step 13.
9.
Press the [OK] key.
10.
Select the key length, and then press the [OK] key.
11.
Select the key format, and then press the [OK] key.
The maximum number of characters that can be entered in the password field depends on the [Key
Length] and [Key Format] settings. Specify settings in accordance with the following table:
Security Method
Open System - None
Key Length
*1
-
Key Format
-
-
Configuring Network Settings
WEP Key
(Maximum character)
27
Advertisement
Table of Contents
