Ricoh SP 203 SF Operating Instructions Manual page 148

8. Configuring the Machine Using Utilities
Item
DDNS
Details
Item
Default Gateway
Address
DNS Server
LPR
RAW
IPP
Configuring the IPv6 settings
Click [IPv6] to display the page for configuring the IPv6 settings.
• In [LAN Type] in [Interface Settings], you can select [Ethernet] to display the wired LAN IP address,
or [Wireless LAN] to display the wireless LAN IP address.
146
Select whether DDNS (Dynamic DNS) name resolution for the network interface
board or wireless LAN interface unit is active or inactive.
When active, the DNS database is immediately updated.
Enter the default gateway address.
The default gateway address is the IP address of the host or router used as the
gateway when communicating (printing or exchanging information) with a
computer on another network.
When using DHCP, the default gateway address obtained from the DHCP
server is used. If the address cannot be obtained from the DHCP server, the
default gateway address set for the device is used.
Select whether to use the DNS server obtained from the DHCP server, or the
DNS server set for the device.
Select to enable network printing using LPR/LPD.
Select to enable network raw printing.
Select to enable network printing using Internet Print Protocol.
Description
Description