Table of Contents
Advertisement
1.
Launch the Web browser.
2.
In the address bar, enter "http://(machine's IP address)/".
3.
Click [Log in].
4.
Enter the administrator password, and then click [Log in].
If you are logging in for the first time, enter "admin133" as the password.
5.
In the menu area, select the setting you wish to specify.
6.
Specify the machine settings.
7.
Click [OK].
The specified settings are transmitted to the machine.
Settings List
This section explains the Web Image Monitor settings.
Checking the System Information
On the top page, you can check the current system information such as the device information, paper
tray status, toner status, and total counter.
Item
Status
Displays the icon indicating the device status.
Toner
Displays the remaining toner level.
Toner levels are not displayed for Type 3 models.
Total Counter
Displays the total counter.
Paper
Displays the size and type of paper loaded in Tray 1 and the bypass tray.
Using Web Image Monitor
Description
143
Advertisement
Table of Contents
