Identification - Grizzly T33300 Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better under-
stand the instructions in this manual.
A
H
G
F
A. Secondary Handle: Lowers saw blade into
workpiece once plunge release and ON/OFF
trigger have been pulled.
B. ON/OFF Trigger: Starts/stops saw blade
rotation and motor.
C. Plunge Release: Pivots saw blade down to
plunge into workpiece.
D. Primary Handle: Held when plunging and
advancing position on workpiece/guide rail.
Model T33300 (Mfd. Since 04/22)

Identification

B
E. Rail Adjustment Knob (1 of 2): Adjusts play
F.
G. Bevel Gauge & Lock Knob (1 of 2): Sets
H. Depth Stop & Lock Knob: Sets maximum
in how saw slides along guide rail.
Zero-Stop Set Screw: Sets zero-stop point
for calibrating bevel gauge.
angle (up to 45°) at which saw blade will cut
into workpiece, and locks it into place.
depth saw blade will enter workpiece.
C
D
E
-3-