Omron H5S-B Manual page 9

H5S
Mounting Dimensions
Flush Mounting (H5S-B)
Panel Cutout
Note: Panel thickness: 1 to 5 mm
Track Mounting (H5S-FB with Y92F-90)
79.8 (Note 2)
When mounting the time switch on a soft iron panel using the M4 tapping screws, the diameter of the mounting holes drilled into the panel vary
according to the panel thickness, as follows. If the panel is die-cast, aluminum, the hole diameter should be slightly larger.
Panel thickness
Hole diameter
Accessories (Order Separately)
Y92A-72C Protective Cover
Surface Mounting (H5S-FB)
Note: With mounting track PFP-100N or PFP-50N
With mounting track PFP-100N2
0.8 1.0 1.2
3.6
Y92F-90 Track Mounting Base
(Only for H5S-FB model)
Mounting Holes
1.6 2.0 2.6
3.7
H5S
3.2 4.0
9