Table of Contents
Advertisement
H5S
Pulse Output Operation
Set the Mode Switch to P1 (or P2).
Example: To produce output for 10 s at 9:00 a.m. and 0:15 p.m.
Monday through Friday.
Display and key operation
(Shaded portion indicates
blinking of the indicator.)
1 Specify Monday, Tues-
day, Wednesday, Thurs-
day, and Friday with the
Shift and Set Keys. Set
the time to 9:00 a.m.
with the h and m keys.
Press the Write Key.
2 Set the pulse width to
10 s using the Pulse
Key. (When this key is
depressed, the display
value is incremented
rapidly.)
Display and key operation
(Shaded portion indicates
blinking of the indicator.)
3 Press the Write Key.
(The display returns to
the initial screen after a
1-second pause.)
(In the same manner,
set the time of 0:15 p.m.
for Monday through
Friday.)
4 Press the Write Key. (If
the previously set pulse
width can be used,
press the Write Key
only. The display returns
to the initial screen after
a 1-second pause.)
Set the Mode Switch to
RUN.
Checking the Setting in Operation Sequence
Set the Mode Switch to RUN.
To check the operation of
today.
Example: Wednesday
Display and key operation
(Shaded portion indicates
blinking of the indicator.)
1 Press the Check Key.
2 The first item of today's
operation set for circuit
1 is displayed.
3 Afterward, each time the
Check Key is pressed,
all the operations set for
circuit 1 are displayed
followed by those for cir-
cuit 2. (If nothing is set
for circuit 1, display
starts with the opera-
tions set for circuit 2.)
The output is not changed
even when Check is
pressed. The present value
is displayed again when
Check has been left un-
touched for 20 s or longer.
H5S
To check the operation of a
day other than today.
Example: To check
Monday's opera-
tion on Wednes-
day
Display and key operation
(Shaded portion indicates
blinking of the indicator.)
1 Move the cursor to the
Monday position using
the Shift and Set Keys.
2 Press the Check Key.
(The first item of the op-
erations set for circuit 1
to be executed on
Monday is displayed.)
3 Afterward, each time the
Check Key is pressed,
all Monday operations
set for circuit 1 are dis-
played followed by
those for circuit 2. (If
nothing is set for circuit
1, display starts with the
operations set for circuit
2.)
When the specified opera-
tion has been displayed for
monitoring, the display re-
turns to the initial screen.
7
Advertisement
Table of Contents
