Connecting The Camera To The Television; Using The Tv As A Live Viewfinder; Reviewing Pictures And Video Clips On Your Tv - CONCORD Eye-Q Go Wireless User Manual

CONNECTING THE CAMERA TO THE TELEVISION

1. Connect the TV-Out cable into the jack marked
VIDEO or VIDEO IN on your television.
2. Turn on your television.
3. Set the television to video mode according to the
instructions in the owner's manual. (This is usually
channel 3, 4 or AV).
4. Turn the camera on by pressing the Power button.
5. Connect the other end of the cable into the VIDEO
port located in the cable connection panel. (fig.1.1)

Using the TV as a Live Viewfinder:

1. Connect the camera to the TV.
2. Turn the camera on.
3. Slide the Mode Switch to (
4. The TV will become a live viewfinder.
Note: You may record your TV Mode session by using your VCR. Please refer
to your VCR documentation to learn more about recording.

Reviewing pictures and video clips on your TV:

1. In TV Mode, slide the Mode Switch to (
2. Press to scroll through the saved pictures and video clips.
3. To customize your camera settings and to view more options, press the MENU
button to display the TV Menu on the TV screen.
The TV menu will display the same delete menu and Setup menu used in the
camera. Please refer to pages 34 and 38 for further information.
Viewing video clips:
1. When an AVI file is displayed on the TV, press the OK button to view.
).
).
83
TV MODE
fig.1.1