Installing Arcsoft Software - CONCORD Eye-Q Go Wireless User Manual

INSTALLING ARCSOFT SOFTWARE – ALL WINDOWS USERS
Step 1 Make sure your camera is powered off and not connected to the
computer.
Step 2 Make sure the computer is powered on and Windows is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the CD-ROM entitled PC Installation Disk included in your
camera's packaging into your computer's CD-ROM Drive.
NOTE: If the installer does not automatically start within 30 seconds
after having inserted the CD-ROM, click on Start, select My
Computer and locate the CD-ROM Drive. Double click on the CD-
ROM Drive icon to show its contents. Double-click on the file named
SETUP.EXE and proceed to Step 5.
Step 5 The installation screen
will appear, Click on
Install ArcSoft
Software
CAMERA DRIVERS AND SOFTWARE INSTALLATION GUIDE
69