Setting The Flash - CONCORD Eye-Q Go Wireless User Manual

SETTING THE FLASH

MAIN MENU
Mode
M
Size
Quality
Flash
Flash Mode
Auto Flash
A
Flash
Flash off
How to set the flash:
1. Press the MENU button in (
2. Press until Flash is highlighted.
3. Press to enter the submenu.
4. In the FLASH menu, press
5. Press the OK button to select.
6. Press the MENU button to exit.
7. Position the subject in the camera.
8. Press the shutter button.
• The flash will return to the flash mode set by the Slide Switch.
Note:
• The flash needs to recharge after it is fired. If the Shutter button is pressed
while the flash is charging, the Flash Ready LED will blink. Please wait a few
moments and press the Shutter button again to take a picture.
• Manually setting the flash will override the flash setting set by the Slide
switch. It will be deactivated when the Slide Switch setting is changed or
when the camera is powered off.
The camera judges if a flash is required. If the environment is
too dark, the flash will fire.
Flash will fire in any lighting condition.
The flash will not fire in this mode. Please use this mode if
you want to capture the mood of the ambient lighting or to use
the available light in places where flash photography is
prohibited, such as museums.
• To prevent blurry pictures in low light situations, hold the
camera steady when pressing the Shutter button or mount
the camera on a tripod.
) Camera Mode.
to highlight a flash mode.
21
FLASH
Auto
A
Flash
Flash Off
OK MENU
Description
TAKING PICTURES