Software Installation - CONCORD Eye-Q Fun.Cam User Manual

This section shows you how to install the application software and the
drivers required. Please follow the step-by-step instructions. Do not connect
the camera to the PC until told otherwise during the installation process.
1) Insert the CD into the CD-ROM drive of your computer.
2) If you have the Auto Run feature enabled for your CD-ROM, the setup
application will start automatically.
3) If you don't have the Auto Run feature enabled, click on Start and
select Run... from the Windows taskbar. Type d:/launch to launch the
software installer (d: refers to your CD-ROM drive. If your CD-ROM drive
is not drive d:, use the drive letter of your CD-ROM drive instead).
4) There are three options in the installer:
a) Install Arcsoft (imaging applications)
b) Install Driver (plug and play drivers)
c) Install Twain Driver
5) You can install all the different options one by one by clicking on the
required option. The plug and play drivers and the twain driver MUST
be installed in order to transfer images.
6) Make sure that you have installed the driver in "4b" above and plug
the camera into the USB port of your PC. A USB cable is provided for
this connection.
7) Once the camera is plugged into the PC, a dialog box titled New
Hardware Found will be displayed. DynaVision DC3500 DSC and
DynaVision DC3500 PC CAM will be identified and installed
automatically.

SOFTWARE INSTALLATION

6