Factor
Rear roller level.
Roller condition.
Traction speed.
Groomer reel operation.
Greensmaster Flex 1800/1820/2100/2120
Possible Problem/Correction
Reel and rear roller should be parallel for proper
cutting performance (see Leveling Rear Roller in
Adjustments section of this chapter).
Make sure rollers rotate freely. Repair roller bearings if
necessary (see Roller Service in Service and Repairs
section of this chapter).
Check maximum governed engine speed. Adjust
engine to specifications if necessary (see Adjustments
section in Chapter 3 − Engine).
The traction drive belt may be loose or worn. Check
the condition of the traction belt. Replace traction drive
belt if necessary.
See Troubleshooting section of Chapter 8 − Groomer.
Page 7 − 9
Cutting Unit