Toro Greensmaster Flex 1800 Service Manual page 112

4. Connect spring (item 11 in Figure 15) between trac-
tion lever assembly and operator presence control.
5. Connect wire harness connector to traction switch
(Fig. 15).
6. Connect reel clutch and traction clutch cables to le-
ver assembly (see Cable Replacement in this section).
Check cable operation and adjust as necessary.
7. Check adjustment of traction switch (see Traction
Switch in the Adjustments section of Chapter 5 − Electri-
cal System). Adjust switch if necessary.
8. Install console cover to handle.
Chassis and Controls
2
5
1. Transport lever
2. Reel shaft lever
3. Clearance location
Page 6 − 14 Greensmaster Flex 1800/1820/2100/2120
3
1
4
Figure 17
4. Shifter bracket
5. Screw and nut
5