Table of Contents
Advertisement
4.
While pulling the display cable (1) and WLAN antenna cables (1) through the holes in the computer, pull
display away from computer (2).
5.
If you need to remove the display bezel:
a.
Release the top, left, and right edges of the display bezel (1) from the display assembly.
b.
Run a tool along the bottom edge of the bezel to release it from the display assembly (2).
c.
Remove the display bezel (3) from the display assembly.
Display adhesive is available in the Adhesive Kit as spare part number M57117-001.
The bezel is available as spare part number M57105-001.
6.
If you need to remove the display panel:
a.
The display panel is secured to the display enclosure with tape that is installed under the left and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape (1). While
turning the tweezers, wrap the tape around the tweezers (2) as you continue to pull the tape out
from behind the display panel (3). You must pull the tape multiple times before it is completely
removed.
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
Hide quick links:
Advertisement
Table of Contents
