Intel Wi-Fi 6 Ax210 + Bluetooth 5.2 (Non-Vpro) M27269-006 - HP OMEN 17 Maintenance And Service Manual

Table 5-11 WLAN module descriptions and part numbers (continued)
Description
Intel Wi-Fi 6 AX210 + Bluetooth 5.2 (non-vPro)
WLAN module protective shielding
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
4. Remove the heat sink (see
Remove the WLAN module:
1. Remove the plastic antenna protector from the module (1).
2. Carefully disconnect the antenna cables from the module (2).
3. Remove the Phillips M2.0 × 2.5 screw (3), and then remove the WLAN module from the computer (4).
NOTE:
WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable
connects to the WLAN module #1 Aux terminal.
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
To prevent an unresponsive system, replace the wireless module only with a wireless module
Bottom cover on page
Heat sink on page
Models have either one or two WLAN antennas. On models with two antennas, the #1 white
Preparation for disassembly on page
29).
Battery on page
38).
Spare part number
M27269-006
M14330-001
29).
30).