System Board - HP OMEN 17 Maintenance And Service Manual

3. Disconnect the cable from the ZIF connector on the bottom of the board (3).
Reverse this procedure to install the USB board.

System board

To remove the system board, use these procedures and illustrations.
Table 5-13 System board descriptions and part numbers
Description
System board (includes processor):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating system
xxxxxx-601: Windows 10 operating system
Intel Core i9-11900H processor and NVIDIA GeForce RTX 3080 graphics (16 GB)
Intel Core i9-11900H processor and NVIDIA GeForce RTX 3080 graphics (8 GB)
Intel Core i9-11900H processor and NVIDIA GeForce RTX 3070 graphics
Intel Core i7-11800H processor and NVIDIA GeForce RTX 3080 graphics (16 GB)
Intel Core i7-11800H processor and NVIDIA GeForce RTX 3070 graphics
Intel Core i7-11800H processor and NVIDIA GeForce RTX 3060 graphics
Intel Core i5-11400H processor and NVIDIA GeForce RTX 3060 graphics
Before removing the system board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the heat sink (see
44 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 30).
Heat sink on page 38).
29).
Spare part number
M73505-xx1
M57135-xx1
M57137-xx1
M73504-xx1
M57136-xx1
M57133-xx1
M57132-xx1
29).