Cleaning the Rollers and the Separation
Module Assembly
Prolonged used of the scanner may result in accumulation of ink and other
residue on the feeder's rollers, affecting their efficiency. Clean the rollers and the
Separation Module Assembly periodically to maintain performance.
1. Push the Release button to open the ADF cover as shown in the graph
Release button
2. When the ADF cover is opened, you can find several groups of rollers and
NOTE: Do not attempt to spin or rotate the rollers while cleaning, for it may
damage the drive train mechanism of the ADF. The Feed Roller Assembly can be
removed and cleaned separately, refer to "Maintenance" section to remove the
Feed roller Assembly.
50
ArtixScan DI 5240/5250/5260 User's Manual
below.
the Separation Module Assembly locating at the inner sides of the ADF.
Then, clean them with a lint-free cloth or a swab moistened with alcohol or
water, as shown in the graphic below.
ADF cover
Driving Rollers
Feed Roller Assembly
Idle Rollers
Separation Module Assembly