Table of Contents
Advertisement
Scanning Documents Automatically
This scanning scenario guides users to perform an automatic scan by using the
Auto Paper Detection function. It works only when the scanner is equipped with
a paper detecting sensor
1. Launch ScanWizard DI as a stand-alone program by clicking on the
2. Follow the procedure (steps 3 through 8) for "Scanning Documents" section
3. Click the OK button to close the Scan Setup interface and return to the Main
4. In the Main interface, click the File Name menu button
5. If it is the first time that you perform an automatic
6. Next, click the Normal Scan button to start your automatic scan.
34
ArtixScan DI 5240/5250/5260 User's Manual
ScanWizard DI icon on the desktop.
to specify your scanning requirements in the interface.
interface of ScanWizard DI.
to select a file format for the scanned images.
If you want to save all scanned pages of your
document in one file, please select "PDF-Multiple
Pages" or "TIFF-Multiple Pages" from the drop-down
option menu.
scan by using the Auto Paper Detection function,
follow the steps below to activate it.
a)
Click the Arrow icon next to the Normal Scan button (by default) to
bring up the Scan mode options menu.
b)
Move your cursor upon the "Auto Paper Detection" and click to select it.
When done, the selected function will be highlighted and activated.
Arrow icon
a)
When the Normal Scan button is pressed, an "Automatic Paper Sensor"
window appears on the screen. If necessary, adjust slider bars to
increase/decrease the value of user settings for the "Paper Sensitively"
and "Stop the Auto Scan after..."options.
Advertisement
Table of Contents
