Table of Contents
Advertisement
Scanning a Book
The Book Scan button in ScanWizard DI is quite helpful when you want to scan
a physical book and save it as an electronic file. The scanned result can be used
directly as an E-book and you do not need any editing software to maintain it
later.
1. Launch ScanWizard DI as a stand-alone program by clicking on the
ScanWizard DI icon on the desktop.
2. Follow the procedure (steps 3 through 8) for "Scanning Documents" section
to specify your scanning requirements in the interface.
3. Click the OK button to close the Scan Setup interface and return to the Main
interface of ScanWizard DI.
4. In the Main interface, click the File Name menu button
to select a file format for the scanned images.
If you want to save all scanned pages of your book in
one file, please select "PDF-Multiple Pages" or "TIFF-
Multiple Pages" from the drop-down option menu.
5. If it is the first time that you scan a book, follow the
steps below to switch to the Book Scan mode from
the Normal Scan mode.
a)
Click the Arrow icon next to the Normal Scan button (by default) to
bring up the Scan mode options menu.
b)
Move your cursor upon the "Book Scan" and click to select it, the Book
Scan button will appear on the screen. Then, select an opening direction
for your book from its submenu.
When done, the Book Scan mode is activated.
Normal Scan
mode is the
default scan
mode
According to the opening direction of a book, the system offers you
three choices: Left Hand Open, Right Hand Open and Upward Open.
Move your cursor upon the option to highlight and select it.
Arrow icon
Book scan mode
ArtixScan DI 5240/5250/5260 User's Manual
31
Advertisement
Table of Contents
