Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Vostro 3515 2V448 Service Manual

Table of Contents

Advertisement

Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe

Screw list

NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
3-cell battery
4-cell battery
M.2 2230 solid-state drive
M.2 2280 solid-state drive
Wireless card
I/O board
10
Removing and installing components
Screw type
Quantity
M2x5
6
Captive screw
2
M2x3
3
M2x3
4
M2x2
1
M2x2
1
M2x3
1
M2x3
2
Screw image
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vostro 15 3515P112f

Table of Contents